CUMI Impact Drill 13mm 600 Watts - CID 013 VR

Impact Power Drill for various drilling applications like Drilling Concrete, Drilling on Steel, Drilling on Wood.
Manufacturer: CUMI
Delivery date: 24 Hours
Old price: ₹3,350.00
Ship to
Shipping Method
Estimated Delivery
No shipping options


Product Specifications

Model CodeCID 013 VR
DescriptionCUMI Impact Drill 13mm
Operating Voltage230 Volts, 50 Hz
Power650 W
Speed (No Load)0-2800 rpm
Weight1.3 kg
Type of CarbonsAuto- stop type
Chuck Specifications1/2"
Steel Capacity10 mm
Concrete Capacity13 mm
Wood Capacity15 mm

Standard Accessories

  • Wrench
  • Side Handle
  • Chuck Key

Application Details

  • Drilling on Concrete
  • Drilling on Steel
  • Drilling on Wood
Products specifications
Attribute nameAttribute value
Product Information
Product Information

Usage Instructions

Attaching the Addition Handle

For safety reasons,always use the additional handle supplied

Open the clamping ring by turning the additional handle anticlockwise. Push the additional handle onto the collar of the machine. Insert the depth stop. Securely tighten the additional handle at the angle required for the application.

Adjusting the Depth Stop

Loosen the additional handle. Set depth stop to the desired drilling depth and retighten additional handle.

Switching On and Off

To start the machine, press the trigger switch. Press in the trigger switch to change the speed. For continuous operation the trigger switch can be locked using the lock button. To stop the machine, press the trigger switch again.

In continuous operation, the machine continues running if it is forced out of your hands. Therefore, always hold the machine with both hands using the handles provided, stand in a safe position and concentrate.

Switching Between Normal / Impact Drilling

Select the desired operating mode by pushing the sliding switch.

Drilling Drilling
Impact DrillingImpact Drilling

Work with high speed settings when impact drilling.

Impact drilling and normal drilling only in a clockwise direction.

Selecting the Direction of Rotation

Do not activate the direction switch unless the motor has completely stopped.

Select direction of rotation:
R = Clockwise
L = Anticlockwise

Inspection and Maintenance Tips

  • Check the drill bit and replace with a new bit whenever cutting edge is worn or damaged.
  • Continuous use will endanger the user and reduce usable life of the tool.
  • Check and replace carbon brushes when they are worn-out. Auto Stop carbon Brushes fitted on the machine will stop the machine when it is worn out.
  • Inspect the tool regularly for loose screws and replace/tighten them periodically.
  • Always be sure that the machine is switched OFF and unplugged when changing a drill bit or for maintenance Purpose.
  • To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by CUMI Authorised Service Center only.